Filter
Top Products
Skip
Click to activate the configuration settings in the Protocol settings group.
This button does not appear, if you configure a camera that was detected by network scan and
added by clicking . The button appears, if you select a line in the VSG cameras list and
click the Add... or the Edit... button.
Protocol settings
Make the desired protocol settings. Note that the available configuration settings change with
the selected entry in the Type list.
Type
Note: The available configuration settings change with the selected entry.
Entry in the Type list
Available configuration settings
Bosch RCP+ Video input
Select the number of the desired camera if you configure
a multichannel device.
Stream
Select the number of the stream of the selected camera.
Protocol
TCP
Used for transmission in the Internet and / or for lossless
data transmission. Ensures that no data packet gets lost.
Bandwidth requirement can be high.
Use if the device is located behind a Firewall. Does not
support multicast.
UDP
Used for connectionless and lightweight data
transmission in private networks. Data packets can get
lost. Bandwidth requirement can be low.
Supports multicast.
ONVIF
Stream
ONVIF Media Profile
Contains advanced settings including a specific camera
including amongst others the encoding settings.
Video source
Contains basic video settings including a specific
camera.
Corresponds to a physical video input.
Token
Select a profile number. If you selected Video source,
usually only one entry is available.
Name
Displays the display name of the profile if ONVIF Media
Profile is selected. If multiple names are available,
<multiple> is displayed.
Video Recording Manager User interface | en 37
Bosch Sicherheitssysteme GmbH 2013.01 | v1 | DOC