Filter
Top Products
User interface
This chapter contains information on all VRM related pages available in
Configuration Manager.
Notice!
Detailed information about the configuration options for a device can be found in the relevant
device documentation and the online Help in the relevant Web browser view.
Notice!
Some settings (for example in the Date/Time tab) can only be changed if the device is not
currently recording.
If necessary, stop any recordings before making changes.
Device Allocator dialog box
Main window > Tools menu > Device Allocator... command > Device Allocator dialog box
Installed devices / Allocated devices
All IP cameras and encoders detected in the network are displayed on the left pane, while
those allocated to the VRM system appear on the right pane. You can sort the list entries by
clicking the relevant table header.
Recordings managed by VRM
Click to clear if you want the recordings of this device not be managed by VRM. This is for
example the case when you want to configure ANR for this device.
Click to get step-by-step instructions:
– Allocating detected devices
– Adding a VSG to the system, page 20
Device Editor dialog box
Main window > Devices tab > Expand > Expand Pool n > Right-click Devices >
Click New Device...
The Device Editor dialog box allows you to add devices manually that cannot be found by the
device scan.
URL
Type in URL or IP address. For devices in another network add the port number. Example:
172.22.5.6:1754
Type
Select the <Auto detect> entry. If the device type cannot be found, select the required entry
manually.
Pool tab
Main window > Devices tab > Expand > Click Pool n
Allows you to configure recording settings valid for all devices that are collected in this
storage pool.
Name
Type in a name for the storage pool.
11
11.1
11.2
11.3
26 en | User interface Video Recording Manager
2013.01 | v1 | DOC Bosch Sicherheitssysteme GmbH