Filter
Top Products
VRM Settings tab
Main window > Devices tab > > General > VRM Settings tab
VRM Server name
Type a name that is displayed in the device tree of Bosch Video Client.
Server initiator name
Displays the iSCSI initiator name of VRM Server.
System-wide CHAP password
Enter the password that you have configured in the iSCSI storage device. The CHAP password
is valid for the VRM and is sent to all devices automatically. Replay clients do not need
additional configuration. You must configure the iSCSI systems manually with the CHAP
password. If you are using a CHAP password, all storage systems have to be configured to use
the CHAP password. Only one system wide CHAP password is supported by the VRM system.
Use as failover server / Master server IP address / Password
You can set up a computer as the master server, provided that VRM Server is started on it, and
set up another computer as a failover server. The configuration settings of the master server
are then synchronized on the failover server. If the master server fails, the failover server
automatically takes over the management of the VRM system.
Recording Preferences tab, page 34
Check Now
Click to reassign the devices of all storage pools to their iSCSI storage systems. This is only
being performed on storage pools with Automatic recording mode.
Click to get step-by-step instructions:
– Configuring a failover server, page 23
See also
– Adding a storage pool, page 14
User Management tab
Main window > Devices tab > > General > User Management tab
Allows you to configure user groups and users used for configuring VRM Server.
Add...
Click to display the User or Group dialog box.
Edit...
Click to display the User or Group dialog box.
Remove
Click to display the Remove User or Remove Group dialog box.
VRM Rights tab
Click to configure rights for a selected user group.
Password
Type in a password for the selected user.
Confirm
Confirm the password.
11.5
11.6
30 en | User interface Video Recording Manager
2013.01 | v1 | DOC Bosch Sicherheitssysteme GmbH