Filter
Top Products
USING THE AVIDEA REMOTE
SETUP AND USE GUIDE
10
Zone 2
The Avidea System has the ability to provide audio simultaneously and
independently in two different listening "zones". With the connection of
additional amplification and loudspeakers to the Zone 2 output from your
Avidea Control Center you can for instance, enjoy a CD in one room and the
FM tuner in another.
To activate a Device from Zone 2 tap the Zone 2 button. Devices available
now come up in a new page labeled Zone 2. You operate the Devices as you
would in Zone 1. To turn off Zone 2, or return operation to Zone 1, tap the
Off or Zone 1 soft buttons at the bottom of the touch screen.
Note If a Zone 2 user selects a Device already in operation in Zone 1 (or vice versa)
both users will have control of that same Device. This may cause conflicting
use and programming.
Listen Modes
The Avidea Remote allows adjustment of several “listening modes”. Listening
Modes allow you to use two, five or all six of the system’s speakers, depending
on program type, format, and personal choice. The Avidea subwoofer is
always on, regardless of the number of speakers being used.
Note Page 2 of each Device contains a customized Listening Mode page for that
Device.
On the Listening Mode page you will find the following soft buttons:
Display
Turns the display and lights on the Avidea Control Center on or off. The
power button will remain illuminated.
Status
Brings up the Status Bar on your TV. Shows full
system configuration, settings, and Device playback
information.
Surround Music
Uses all six speakers to recreate the ambience of a
live musical performance. This is the preset mode
for all audio-only Devices.
Stereo
Uses only two speakers, the front left and front right,
allowing Avidea to behave like a traditional 2-channel
ster
eo system.