Filter
Top Products
SETUP AND USE GUIDE
23
6 Enter the code from the ‘Table of Brands’ from p. 40 onwards.
Note To delete a number, tap on the LCD touch screen.
In the Table of Brands the brands are ordered alphabetically per Device.
Some brands use several codes for the same Device. The codes in the table
of brands contain only the basic functions of the Devices. Enter the first
code and see how well it operates your Device. If your Device is not
responding properly, you should try out the second code for that brand.
Try out all codes for the brand until you can operate the Device to your
satisfaction.
Note The Brand Codes provided for your remote represent the most comprehensive
library currently available. You may discover that certain hard and/or soft
buttons do not perform exactly as you expect. If this happens, please use
Learning Mode to teach your Avidea Remote the exact desired functionality
using your original remote controls. See ‘Learning Commands’ on p. 24.
7 Press OK to enter the code for your Device.
When the code is correct, you will hear a confirmation beep. Press the
mode button for 3 seconds. The mode screen appears. For normal
operation, press Use.
If you enter an incorrect code, you will hear an error beep. A message screen
appears.
1 Press OK.
The A
videa Remote returns to the Brand screen where the incorrect code
is displayed.
2 Look up the correct code and repeat instructions 6 and 7.
USING THE AVIDEA REMOTE