Filter
Top Products
TABLE OF CONTENTS
SETUP AND USE GUIDE
5
USING THE AVIDEA REMOTE
Activating the Remote Control
Turning on the Display and the Backlight
The Remote Control’s display can be activated
in four different ways:
Tilting the unit more than 50 degrees
as illustrated activates the display but
not the backlight.
Pressing the Backlight button on the
left side will activate the display and
the backlight.
Tapping the screen gently with your finger
or a blunt, soft object like a pencil eraser
will activate the display, but not the backlight.
Pressing any button will activate the display, but not the backlight.
Note: You can set the backlight to automatically activate whenever you use the
remote. See ‘Adjusting the Backlight Timer’ on p. 15.
Whenever batteries are installed in the Avidea Remote or when it is reset, the
Remote will beep twice. The Avidea Remote then automatically switches to
the Device Page that displays all potential Devices that your Avidea Remote
can operate.
Fig 1: Device Page