Filter
Top Products
TROUBLESHOOTING
SETUP AND USE GUIDE
38
Programming Problems
Buttons are not sending the correct commands
• Check if you have defined the correct brands for your Devices. See
‘Entering Codes for Other Devices’ on p. 21.
• Check whether the button of the Device is learned properly. See ‘Learning
Commands’ on p. 24.
• Check whether the macro is recorded properly. See ‘Recording Macros’
on p. 28.
The Avidea Remote will not switch modes
• Replace the batteries. When the batteries are low the Avidea Remote
prevents you from switching modes so that no customization can get lost.
The Avidea Remote is low on memory
• Revert the Avidea Remote. See ‘Revert’ on p. 17.
The configuration file is corrupted
• When this unlikely event occurs, you have to revert to the original
configuration or use Freedom Edit to download a new configuration file.
All your customized commands and Devices will be lost and you will have
to reprogram your Avidea Remote. If you use Freedom Edit, please make
backup copies of your customized configurations. See ‘Revert’ on p. 17
and ‘Freedom Edit’ on p. 32.
The Avidea Remote error message
If the error message ‘Invalid CF version or corrupt Flash!’ occurs:
• Use the Reset button on the back of the Avidea Remote. See ‘How do I
reset the Avidea Remote?’ on p. 35.
• Try to recover the Avidea Remote Configuration File (NCF) by
downloading a backup copy or the default file from Freedom Edit. See
‘Freedom Edit’ on p. 32.
• Go to the Boston Acoustics website
http://www.bostonacoustics.com/avidea for more information.