Filter
Top Products
SETUP AND USE GUIDE
30
8 Tap the button of the Device you want to go to.
The Device screen appears.
9 Tap the soft or hard buttons with the commands you want to record.
10 Press the Page Up and Page Down buttons to go to different screens of
the same Device.
–or–
Press the
Device button to go to the Device Page again.
11 To add delays and beeps to the macro, press the Extra hard button on the
Device Page.
The Extra screen appears.
Note Delays may be required between commands. Some Devices will not respond
to another remote command immediately after turning on.
1
T
o add a delay
, tap one of the Delay buttons.
By tapping several Delay buttons, the duration of the delay will
be incr
eased.
2
T
o add a beep, tap the
Beep button.
3 Press the Device button to go to the Device Page again.
USING THE AVIDEA REMOTE