Filter
Top Products
3-6
Cisco AS5350 Universal Gateway Chassis Installation Guide
78-10754-03 0A
Chapter 3 Installing the Cisco AS5350
Connecting to the Network
Figure 3-5 Cisco AS5350 Ground Lug Attachment
Figure 3-6 Cisco AS5400 Ground Lug Attachment
Connecting to the Network
This section describes how to connect the Cisco AS5350 to your network. The cables required to connect
the universal gateway to a network are not provided. For ordering information, contact customer service.
See the “Obtaining Technical Assistance” section on page xiv, or see Appendix C, “Cabling
Specifications,” for cable and port pinouts.
Warning
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports use both RJ-45 connectors. Use caution when connecting cables. To see
translations of the warnings that appear in the publication, refer to the Regulatory Compliance and
Safety Information document that accompanied this device.
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity. To see
translations of the warnings that appear in the publication, refer to the Regulatory Compliance and
Safety Information document that accompanied this device.
82735
Ground lug
attachment
82734
Ground lug
attachment