Filter
Top Products
dCS 904 User Manual Manual for Software Version 1.5x and 1.36
dCS Ltd June 2000
Manual part no: DOC135904 iss 2B2
Page 19
135904ma2b2.pdf file available from website
Contact
dCS
on + 44 1799 531 999 email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
The Menu Sequence
To access the Function Menu, hold down the
Menu Step
button and press the
Menu Set
button.
To step through the Menu items, press the
Menu Step
button repeatedly.
To step back, press the
Noise Shapin
g
button.
To select an item or one of its options, press the
Menu Set
button.
To exit the Function Menu, either select the
End
item or wait five seconds.
AES 0
Func Issue Filt DSD DSD 4
Opens the
Function Menu
Displays the
fitted software
issue number
Selects an
alternative
filter
Selects DSD
mode
Enables DSD
on AES 1-4
XLR outputs
v 1.50 Filt 1 Off Off
Filt 2 On On
…P3D
Filt n DSD4
Heat 7 - Seg Test Tone DSD 0
Displays the
internal
temperature
Disables the 7-
segment display
when idle.
Runs a display
and DSP self
test routine
Turns on and
sets a test tone
Selects DSD
SDIF format
Fahrenheit On Level (dB) SDIF2
Celsius Off Freq (kHz) SDIF3
On / Off
Up
Phone Part S - No RS232 BNC O
Displays
dCS'
telephone
number
Displays the
control PCB
part number
Displays the
control PCB
serial number
Displays and
sets the unit's
RS232 address
Sets the mode
of the 75R Out
connector
dCS002540? 0002-540-?-? 0 ... 99 SDIF
AES
CL. 1
CL. 64
End Loc Offst A - SL Ref In
Exits the
Function Menu
Locks out the
front panel
controls
Trims the
mastermode
VCXO
frequency
Automatically
slaves when ref
input available
Sets the mode
of the AES Ref
I/O connectors
Off
+9.9 ~ -9.9ppm
Off Loop
On On Loop.t
Int
Standard software v1.5x. Some features are not available in DSD mode.
P3D software v1.36. P3D mode is only available on some hardware configurations
DSD modes only
{
Figure 3 – Menu Sequence