Filter
Top Products
Icon Description
Static LAG
NOTE: The image shows two external rack switches. However, the standard configuration also
supports uplinks of all four ports to a single external rack switch.
Network adapter isolation configuration
In this configuration, the individual node network adapters are isolated from the other nodes in the sled.
Any inter-node network traffic is routed to the external switches before being directed back to the
destination nodes. The external ports on the embedded network switch (or switches) are configured into
a single trunk or LAG for throughput and redundancy. The external rack switches are on the same
network in this configuration.
NOTE: The network adapter isolation configuration also supports uplinks of all four ports to a single
external rack switch.
This configuration enhances security, as security features like firewalls are installed in the external rack
switches, and is useful in multi-tenant configurations.
Figure 6. Network adapter isolation configuration
Table 6. Network adapter isolation configuration icon description
Icon Description
Network path
Single trunk configuration or LAG
Isolated networks configuration
In this configuration, each of the two LOMs on a node is mapped to separate I/O modules and external
rack switches, to provide maximum redundancy. The two external switches are on separate networks in
this configuration.
29