Filter
Top Products
Hard drives/SSDs
Depending on the configuration, your system supports four 2.5 inch SATA hard drives/SSDs, or eight 1.8
inch SATA SSDs. All drives connect to the system board through the hard-drive/SSD backplane. The hard
drives/SSDs are supplied in special hot-swap drive carriers that fit in the drive bays.
Hard drive/SSD to node assignment
The hard drives/SSDs are not shared resources between the nodes in the system. Each hard drive/SSD is
assigned to a specific node. Depending on the configuration, the hard drives/SSDs are assigned to the
nodes in the following order.
Figure 19. Hard-drive/SSD bay numbering — 2.5 inch hard-drive/SSD system
Table 12. Hard drive/SSD to node assignment — 2.5 inch hard-drive/SSD configuration
Hard-Drive/SSD Bay Node
A-0 A
B-0 B
C-0 C
D-0 D
Figure 20. SSD bay numbering — 1.8 inch SSD system
Table 13. Hard drive/SSD to node assignment — 1.8 inch SSD configuration
Hard-Drive/SSD Bay Node
A-0 A
A-1 A
B-0 B
B-1 B
44