Filter
Top Products
1
About your system
This document provides information on the Dell PowerEdge FM120x4 systems, installed in the Dell
PowerEdge FX2 enclosure. For information on the enclosure components, including shared resources
like the power supplies, Chassis Management Controller (CMC), cooling fans, and I/O modules, see the
Dell PowerEdge FX2 and FX2s Enclosure Owner’s Manual at Dell.com/poweredgemanuals.
Terms used in the document
Table 1. Terms and description
Term Description
Enclosure Refers to the PowerEdge FX2 enclosure.
Sled or system Refers to the PowerEdge FM120x4 system.
Nodes Refer to the four compute nodes (Intel Atom
C2000 processors) in the FM120x4 sled. Each node
functions as an independent server and can be
remotely managed through individual iDRACs.
Hard-drive/SSD bay Refers to the slots on the sled front panel in which
the hard drives/SSDs are installed.
Warm swap A component is considered warm swap if the node
associated with the component must be turned off
before adding or replacing the component.
However, the sled and the rest of the nodes remain
powered on.
Hot swap A component is considered hot swap if it can be
removed or installed while the nodes and the sled
are powered on.
7