Q-See QS408 DVR User Manual


 
74
PICTURE 7-68
PICTURE 7-69
PICTURE 7-70
PICTURE 7-71
Network
Click
to access setup interface;
the parameter settings are the same as on
the DVR.
Setting
Click
to access setup interface;
the parameter settings are the same as on
the DVR.
BANDWIDTH: Set the bandwidth in kbps (128k, 192k, 256k, 384k, 512k, 1024k) that you
want to allocate for traffic depending on the available internet bandwidth. This bandwidth does
not include audio.
FILE SAVE PATH: The save path of captured picture and recording video. IE login password
and DST settings you can set as DVR setting.
Maintenance
Click
to access maintenance
interface; you can reboot DVR or remotely
upgrade firmware.
Host Info
Click to access system
information interface (see Figure 4.3.14). This
interface includes hard drive status, remaining
recording time, firmware version and MAC
Address. All the information is fixed, it cannot
be changed.