Filter
Top Products
80
Question 6: DVR is having problems with real-time images, such as bad image color or
serious brightness distortion, why?
Answer:
• If PAL and NTSC is not correctly selected on the BNC output, the images will be in black
and white
• DVR is not compatible with monitor
• The video transmission distance is too far
• The DVR color, brightness, etc. settings need to be adjusted
Question 7: Why don’t I have audio when monitoring?
Answer:
• Check sound box or speaker functions. Also check for possible short circuit.
• Audio source may be connected to the video channel. You can click to full-screen to
check.
• The main board of the DVR is defective
Question 8: Why don’t I have audio when playing back?
Answer:
• Setting problem: open audio-video item
• Check the audio to see if it is closed in playback interface
Question 9: Why is my System time not correct?
Answer:
• Wrong setting or user did not click “Edit” to confirm
• Battery is not connected properly
• Battery is dead and needs to be changed
Question 10: Why does the “Stop recording” by the right mouse button not work?
Answer:
• The “Stop recording” by the right mouse button is only suitable for Manual recording. It
can’t stop recording when recording on a set schedule or on motion recording
Question 11: Why is Motion detection not working?
Answer:
• The settings in the motion detection area is not correct
• Sensitivity is too low
Question 12: Why is the USB device giving me a backup error?
Answer:
• The data exceeds the capacity of backup device
• The backup device is incompatible
• The backup device is damaged
Question 13: Why does the Remote Control not work?
Answer:
• The address of remote control is not correct
• The distance of remote control is too far or the angle is too wide
• Remote control batteries are low
• Remote control is damaged or the front panel of DVR is damaged