Filter
Top Products
Programming the Remote ControlChapter 7
114
Resetting the Programmable Buttons
If you make a mistake, or are having difficulty, you can reset the programmable buttons.
Once you do so, all the buttons on the remote will return to the unprogrammed state of a
new remote.
1. Prepare the remote control. Point the remote away from your recorder. Press and
hold the TV PWR button and DIRECTV button simultaneously until the red light at
the end of the remote control comes on, remains steady, then stays on when you
release the buttons.
2. Press THUMBS DOWN three times, then press ENTER. (To cancel, press CLEAR
before you press ENTER.)