Filter
Top Products
154
Appendix A
Back Panel Reference
buttons on the remote control are pressed or to indicate signal strength when you are
positioning your dish. If you use Digital Audio Out, you will not hear these tones.
10. Satellite In 2: If you have a Dual LNB satellite dish, you can connect the second
satellite cable from your wall to the Satellite In 2 jack. Connecting both Satellite In 1
and Satellite In 2, and completing the required steps in Satellite Setup, allows you to
record two programs at the same time (dual tuner).
11. Satellite In 1: Connect the satellite cable from your wall to the Satellite In 1 jack. You
will not be able to watch DIRECTV
®
channels if you do not make this connection.
12. Channel 3/4 Switch: If you use RF Out, set the output to channel 3 or 4 using this
switch. To get the best picture, select the channel that is not occupied by a local
broadcast channel. For example, if there is a local broadcast station on channel 4,
select channel 3 for the output on the recorder. You need to set your television to this
channel (3 or 4) in order to view programs through the recorder.
13. RF Out: If your TV only has RF In, connect the recorder to your TV’sRFInusingthe
coaxial RF cable (supplied). The RF In jack on your TV may not be labeled “RF In;” it
may be labeled “VHF/UHF In” or “Antenna/Cable In” instead. If your TV has
multiple inputs and you can use the recorder’s S-Video Output or Composite Video
Output, don’t use this jack.
14. RF In: If you use an antenna, and your TV has only one input, connect your antenna to
the recorder using your existing coaxial RF cable (the one coming out of the wall). If
your TV has multiple inputs, you can ignore this jack and connect your antenna
directly to your TV instead. You will NOT be able to you to use DIRECTV and DVR
functions while watching antenna or cable channels, even if you connect your antenna
or cable directly to your recorder.