DirecTV HD DVR DVR User Manual


 
66
S-Video Jack and Cable
S-Video jacks and cables provide the best non-HD picture quality. You will still need to connect the left
and right audio cables to the TV, or optical audio cable to your stereo, because the S-Video cable only car-
ries the picture signal, not sound. A separate audio connection is also required, using either Digital Audio
Optical cable or the audio portion of an A/V cable.
Audio/Video (A/V) Jack and Cable
Audio/Video (A/V) cables provide very good picture quality and stereo sound. The video cable should
be used if you don’t have HDMI, component or S-Video cables, or your TV does not have HDMI,
component or S-Video jacks. The audio cable may be used if you have connected your TV with S-Video
or Component cables, which don’t provide audio signals. The DIRECTV Receiver’s A/V jacks are color
coded (yellow for video, red for right audio and white for left audio). If your TV has only one input for
audio (mono), connect it to the left (white) audio jack on the DIRECTV Receiver.
Telephone Jack and Cord
The telephone line cord connects your DIRECTV Plus HD DVR to a land-based telephone line. The
phone line connection is used to periodically call DIRECTV. This connection is required for sports pack-
age subscriptions and for purchasing Pay Per View movies and events. You will need an RJ11-type modu-
lator jack (the most common type of phone jack). Note: Do not connect your receiver to a digital PBX
phone system — doing so may permanently damage your equipment and void your warranty.
S-Video Jack
L
R
R
Video
Phone
Jack
Note: Not all cables come with your
digital satellite receiver; you may
need to purchase additional cables,
depending on your setup.