Filter
Top Products
lPage 47
Testing the Phone Connection
2. Select the System Setup option.
3. Select the
Alternate Audio option.
4. Select the language you want in the
Languages list.
Note: Alternate provides visually-impaired customers with a visual
description of the program.
5. Select
Save to save your language choice. The receiver displays the
System Setup menu.
6. Press VIEW TV to exit the
System Setup menu.
TESTING THE PHONE CONNECTION
STARTING A TEST
1. Press the MENU button.
2. Select the System Setup option.
3. Select the
Diagnostics option.
TELEPHONE CONNECTION TEST
This test checks that the receiver telephone connection is correct. Select the
Connection option to begin the test. The receiver displays a message
asking you to wait until the test is done.
• If the telephone connection is correct, the receiver displays a
Phone
Connection OK
message.
• Select the
Dial Out option so the receiver can make a toll-free call to the
Customer Service Center. Press the SELECT button to start the call.
When the call is done, select the
Cancel option to exit the test menu.
• If the telephone line is not connected properly, the receiver displays a
failure message. Check the telephone connection and then repeat the
test.
Note: If you have the receiver connected to a DSL (Digital Subscriber
Line) phone line, it may cause this test to fail. If so, you will need to
install a DSL filter between the receiver and the phone jack on the wall.
Tip: Before you do
the telephone test,
make sure that an
active telephone
line is connected
to the Telephone
Jack on the
receiver back
panel.
Tip: You can get a
DSL filter from
your Internet
Service Provider
or a local
electronics parts
store.