Filter
Top Products
Page 3
Step 2: Finding Programs To Watch
STEP 2: FINDING PROGRAMS TO WATCH
First, make sure the receiver is turned on. Press the POWER
button on the remote or press the POWER button on the
receiver. There are two ways to find information on programs.
•Press the GUIDE button. When the Program Guide
opens, use the UP or DOWN ARROW to view informa-
tion on other channels. After you have highlighted a
program in the Program Guide, press SELECT to watch
it.
Note: The Program Guide provides a complete listing of all programs
available on all channels, including those that are not in your subscrip-
tion (these channels have red backgrounds).
• While viewing a program, press the BROWSE
(RIGHT ARROW) button. Then press either the UP
or DOWN ARROW. The information on other chan-
nels will appear in the Browse Banner at the bottom
of the screen. Press SELECT to watch the program.
ABOUT SATELLITE TELEVISION
Satellite television uses a satellite in a stationary orbit over the Earth to
deliver television and audio programming. This type of orbit enables the
satellite to stay aligned over one place on the surface of the Earth.
Once the satellite dish is aimed at the satellite, the dish does not have to
move to follow it.
SATELLITE SIGNAL QUALITY
RAIN AND SNOW FADE
Heavy rain, snow, or cloud cover can block the satellite signal, which can
interrupt your programming service. By aiming the satellite dish to get the
strongest signal during installation, you can help prevent rain and snow
from interrupting the signal. Your service will return after the weather
condition has passed.
Tip: The system
automatically
displays
programs based
on the current day
and time. You can
advance the Guide
to view informa-
tion on future
programs, but not
programs that
have already
ended.
Tip: If you lose
your picture, it’s
most likely due to
heavy rain, snow or
snow build-up on
your dish.