Filter
Top Products
Page 51
Installing a DISH 500 Antenna
3. Display the Point Dish and Signal Strength menu by pressing MENU and
and then 6-1-1 (unless the receiver already displays this menu).
4. Select
Peak Angles.
5. Enter your ZIP code in the
ZIP Code field.
6. Select the
Dish 500 option.
7. The menu displays the azimuth, elevation, and skew angles. Write down
these numbers in the blanks provided in the margin.
8. Select
Cancel to exit out of this menu and return to the Point
Dish/Signal
menu.
9. Go to Mounting the Dish on page 52.
Azimuth:
Elevation:
Skew: