Filter
Top Products
User’s Manual
16
Date/Time Setup
Highlight Date/Time in the Main menu and press the
button. The Date/Time setup screen
appears.
Figure 24 — Date/Time setup screen.
CAUTION: If you set a date and time that is older than some of your recorded
images, any images with dates and times later than the new setting will be deleted.
Highlight the first box beside Date/Time and press the
button. The individual sections of the
date highlight. Use the arrow buttons to adjust the numbers. Once you have the correct date, press
the
button.
Highlight the second box beside Date/Time and press the
button. The individual sections of the
time will highlight. Use the arrow buttons to adjust the numbers. Once you have the correct time,
press the
button.
NOTE: The clock will not start running until you have restarted the unit, so you may wish to
set the time last.
Highlight the box beside Time Zone and press the
button. Select the time zone you are in from
the list and press the
button.
Highlight the box beside Daylight Saving Time and press the
button. Pressing the button
toggles between On and Off.
Highlight the Holiday Setup… box and press the
button. You can set up holidays by
highlighting Add: and pressing the
button
. The current date appears.
Highlight the month and day and change them by using the arrow buttons. Press the
button to
add the date. Dates can be deleted by highlighting the X beside the date and pressing the
button.
NOTE: Holidays that do not fall on the same date each year should be updated once the
current year’s holiday has passed.