Filter
Top Products
Use the prior step to assign an IP address. For example, if you got the IP
address from the computer of 192.168.002.101. Assign the DVR’s IP address
as 192.168.002.050. Now Copy the subnet mask and default gateway
information you got from the prior step off the computer to the DVR.
Note: Make sure the modem is in bridge mode. If your Internet Service
Provider is BellSouth you will have a modem/router. BellSouth provides a
Westell modem that includes a built-in router. You will need to disable the
router functionality.
5. The next step is to open ports within your router. Open virtual ports in the router (Log
into the router using a PC)
o EDVR Ports to open: 80, 1600, 37260, 37261, 37262, 37263
Note: If your Internet service provider blocks port 80 you may use a
different port to access the DVR through the DVR’s Network Menu Setup.
Note: If you wish to have multiple users log into the DVR please open a range
for the control and data ports on your router. For example if you would only
like 4 clients to connect to the DVR open 1600 and 37260 ~ 37263.
If you have a Dynamic IP address and have open the ports simply go to
Chapter 9 to Configure DDNS.
Once you have reached this point and you have restarted the digital recorder.
100