EverFocus EDVR SERIES DVR User Manual


 
NO: Press “ENTER” key to leave “LOAD/SAVE CONFIGURATION”.
4. UPDATE SYSTEM SOFTWARE: Turn the jog to enter the selection window.
YES: Select YES to update system software from USB by pressing SELECT to start.
NO: Select NO for canceling updating by pressing SELECT to start.
Note:
1
System will ask you to stop recording if you confirm to update when system is
recording.
2
USB device must be inserted properly before updating system software.
3
Do not remove USB device when you are updating system software, it may cause
crash to the machine.
4
Power failure or machine being turn off during updating process may result an
abnormal start of the machine.
5. LANGUAGE
System can be set in different languages. The available languages depend on the
country or area, subject to change without further notice. Please consult your sales
representative for the most updated information.
6. QUICK PLAY
Allows the user to press the play button and playback video from the time indicated from
this field (1 ~ 59 Min).
ON: Enable quick play. The video played time is the immediate play time from now.
OFF: Disable quick play. Videos will start to be played from the end point of the last play.
TIME: Quick play time, from 1 ~ 59 min. The default value is 10 minutes.
Note: The recommendatory quick play time is 10 minutes. The video cannot be
played due to the video file is not stored to HDD yet if you set a quick play time too
short.
63