Filter
Top Products
3. INSTALL/COVERT
For installation of camera; select “ON” to enable a camera, and “OFF” to disable it.
Please make sure to stop recording before making change of INSTALL. To take full
advantage of the record resource, switch the Uninstalled Camera Ports to OFF in this
section. For COVERT, select “ON” to cover a camera, and disable the screen in live
mode to show up. However, the image is recorded, and can be played back by user
who has playback right. The covert channels will not show up on the sequence mode.
To change this, simply use the Jog Dial on the DVR.
4. SEQ (MAIN/CALL)
Setup a retention period for sequences. To change this, simply use the Jog Dial on the
DVR.
5. REC QUALITY
Select an image quality for recording. Normal record image quality and event record
image quality can be set individually. There are six different qualities available. A higher
image quality needs more HDD space. To change this, simply use the Jog Dial on the
DVR. The theory space needed per second lists below:
23