Filter
Top Products
7. SUMMARY
Dial Jog to change items in the SUMMERY table.
All cameras’ statuses are shown in the SUMMARY table. The table is for checking
camera overall statuses only, not for setting.
Note: The SUMMARY table also exists in ALARM, MOTION and VLOSS SETUP
MENU. All of these SUMMARY tables are also for checking particular overall statuses,
not for setting.
Diagram 3.5
8. Copy camera’s setting from a camera to other cameras
In order to copy the setting from a camera to other cameras, we provide a setting copy
function. Press MENU when you finish setting up a camera, and then press COPY. A
COPIED sign will show up on the top right corner of the screen, and it means the setting
has been copied. Dial the Jog to the camera you would like to copy, and then press
SEARCH to paste. The previous setting of the camera will be covered, and a PASTED
sign will show up.
Note: TITLE, PTZ ID, INSTALL/COVERT cannot be copied. These 3 options need to
be set independently.
26