Filter
Top Products
3
3
.
.
4
4
A
A
l
l
a
a
r
r
m
m
S
S
e
e
t
t
u
u
p
p
M
M
e
e
n
n
u
u
Diagram 3.7
Diagram 3.7 is a screen shot of the ALARM SETUP MENU. An alarm is defined as an
electrical, electronic, or mechanical device that serves to warn of danger by means of a
signal. In this case the signal triggers the recorder to start recording the alarmed event.
This menu contains all the alarm operations and options needed to successfully complete
an alarm recording. In the ALARM SETUP MENU the following fields are defined as:
1. ALARM
This field is to turn alarm detection ON or OFF. The default value is ON. To change this,
simply use the Jog Dial on the DVR.
ENABLE: Enable alarm detection.
DISABLE: Disable alarm detection.
2. ALARM TYPE
This field is to turn alarm recording ON or OFF. The default value is ON. To change this,
simply use the Jog Dial on the DVR.
N. O.: Normal Open alarm.
N. C.: Normal Close alarm.
N.O. Trans.: When the alarm is triggered, buzzer, alarm output and alarm recording
start to function no matter how long the alarm duration is set until you set it back to N.O.
29