Filter
Top Products
The sequence display is located on display with a “ ” sign in the last display of the
screen. The sign will replace “ ” sign in the display when sequence occurs.
Note: Sequence is invalid when the multiscreen display can show all the cameras.
Temperature indication.
When HDD’s temperature is overheated.
Overheat temperature is determined in HDD TEMPERATURE of WARNING
SETUP MENU.
Fan fail indication.
When the fan fails to work normally.
3
Select sign: You can assign a camera to a display by pressing SELECT key in live
mode. Dial Jog to move the select sign to the display you would like to change camera,
and then press channel key from the Channel Panel to relocate the camera.
4
Play status bar: The play status bar appears in play back mode if you enable a
status bar on the screen (Please see DISPLAY, 8
th
item of Front Panel Keypads).
Three parts that are play date, play time and play status will be shown in the play
status bar.
Play Date Play Status Play Time
S
T
F
1. Play date
The play date in which the video is recorded.
2. Play status
It shows PAUSE, play speed and reverse play speed.
“PAUSE”, when the video play is paused.
“>” means normal play speed;
“<“ means normal reverse play speed;
“>> x N” means N time fast play speed;
“<< x N” means N time fast reverse play speed.
3. Play time
The play time at which the video is recorded. The time format depends on the
time format setting in the TIME/DATE SETUP MENU.
12