Filter
Top Products
To set the start time of daylight saving time: To set the start “FROM” time and
“TO” time of daylight saving time.
7. END TIME
To set the end time of daylight saving time.
To set the end time of daylight saving time: To set the end “FROM” time and “TO”
time of daylight saving time.
To set the end week of daylight saving time: Dial the jog to set the end week.
To set the end date of daylight saving time: Dial the jog to set the end date.
To set the end month of daylight saving time: Dial the jog to set the end month.
FEB MARJAN
A
PR MAY JUN
DECNOVOCTSEPAUGJUL
LAST1 ST 2 ND 3 RD 4 TH
THUSUN TUEMON WED SATFRI
8. TIME SYNCHRONIZE
Select “ON” or “OFF” to enable or disable time synchronize which can let you have
correct time automatically when network is connected. To change this, simply use the
Jog Dial on the DVR.
9. TIME SERVER
You can set the time server address where you locate if you connect to network and
enable time synchronize. For checking the IP address of NTP Server, please follow the
steps:
a) Connect your PC to internet for searching the IP address of NTP Server.
b) Go to “START” -> “RUN” -> type “Command” and press “OK”.
20