Filter
Top Products
48
D824/D1624 Reference Manual (Recording Digital Data)
OPTICAL
<Connecting to the D824>
CD-R/MD/DAT
ADAT
DIGITAL/DATA OUT 1-8
<Connecting to the D1624>
CD-R/MD/DAT
ADAT
DIGITAL/DATA OUT
1-8 or 9-16
DIGITAL/DATA OUT 1-8
Digital recording to an external digital device
You can record digital data recorded on the recorder to a connected MD, DAT, CD-R or adat. To do
so, select [SP DIF] or [adat] for the tracks that are assigned to the DIGITAL/DATA OUT jack of the
recorder. You can record digital data to the current Program. The digital output setup menu is
applied globally to all Programs.
<Note>
Data on the additional tracks cannot be digitally recorded to the external device as it is. To output digital data from
the additional track, move it to the real tracks first, then output it to the external device (using the Track Exchange
function). For more information on the Track Exchange function, see page “
72
.”
<Note>
Connecting the recorder to an external digital device via both digital input and output jacks may generate a
digital loop. For more information on this problem, refer to the “Connecting a digital mixer” section below.
* If the connected external device has only a COAXIAL (RCA pin) jack for digital input, use an optional Fostex
COP-1/96k (optical/coaxial converter).
SPDIF :Async
SPDIF :Sync
adat :Async
adat :Sync
[D. in ?] setting
[Clock Sel ?]
setting
Int
Auto
Word
Video
clock received
from WORD IN
Available only when
installing the op-
tional Model 8345
TC/SYNC card. If
you try to select
“Video,” [Void w/o
Video] is displayed
and you cannot se-
lect it.
See the appendix of
the Reference
manual for details.
Regardless of receiving or not re-
ceiving word clock from WORD IN,
the recorder is referenced to the
internal clock. When the recorder
receives correct digital signals, the
[DIGITAL] indicator lights in the
display.
When receiving word clock from
WORD IN, the recorder automati-
cally synchronizes to the incom-
ing clock, while the [DIGITAL] and
[EXT SYNC] indicators light in the
display.
When receiving word clock from
WORD IN, the recorder synchro-
nizes to the incoming clock, while
the [DIGITAL] and [EXT SYNC] in-
dicators light in the display.
Regardless of receiving or not receiving word clock from WORD IN, the recorder synchronizes to the
external S/P DIF digital signal. When the recorder receives correct digital signals, the [DIGITAL] and
[EXT SYNC] indicators light in the display. When Digital In is set to a SYNC mode, if you try to select
[Clock Sel?] menu, The display will show [Clock Sel D.in!] (indicating that the clock is set to Digital In!)
and the recorder ignores your operation.
Regardless of receiving or not receiving word clock from WORD IN, the recorder synchronizes to
the external adat digital signals. When the recorder receives correct digital signals, the [DIGITAL]
and [EXT SYNC] indicators light in the display. When Digital In is set to a SYNC mode, if you try to
select [Clock Sel?] menu, The display will show [Clock Sel D.in!] (indicating that the clock is set to
Digital In!) and the recorder ignores your operation.
Regardless of receiving or not re-
ceiving word clock from WORD
IN, the recorder is referenced to
the internal clock. When the re-
corder receives correct digital sig-
nals, the [DIGITAL] indicator lights
in the display.
When receiving word clock from
WORD IN, the recorder automati-
cally synchronizes to the incom-
ing clock, while the [DIGITAL] and
[EXT SYNC] indicators light in the
display.
When receiving word clock from
WORD IN, the recorder synchro-
nizes to the incoming clock, while
the [DIGITAL] and [EXT SYNC] in-
dicators light in the display.
no clock
received from
WORD IN
no clock
received from
WORD IN
no clock
received from
WORD IN
no clock
received from
WORD IN
clock received
from WORD IN
clock received
from WORD IN
clock received
from WORD IN
When no word clock is received,
the recorder is referenced to the
internal clock, while the [EXT
SYNC] indicator flashes.
When no word clock is received, the
[EXT SYNC] indicator flashes
showing that the unit cannot be
locked.
When no word clock is received,
the recorder is referenced to the
internal clock, while the [EXT
SYNC] indicator flashes.
When no word clock is received, the
[EXT SYNC] indicator flashes show-
ing that the unit cannot be locked.