Filter
Top Products
JPEG2000 Stand alone DVR User Guide
- 24 -
4-1 Log-In
4-1-1 DVR LOG-IN
Press MENU to login DVR system.
Use CH. SELECTORS 1~0 to key in the password.
Then press ENTER to confirm and enter the system.
Erase the wrong password by PIP key.
※ Default password:
ADMIN: blank (No default password. Press ENTER key directly to enter the
system)
4-1-2 SYSTEM MENU
1.[DISPLAY SETUP]
Includes SCREEN DISPLAY, MONITOR SETUP (VGA SETUP)
2.[CONFIGURATION]
Includes HDD MANAGEMENT, TIME/DATE SETUP, CAMERA SETUP,
INTERVAL SETUP, ALARM SETUP, BUZZER SETUP, PASSWORD SETUP,
and SYSTEM INFORMATION.
3.[RECORD SETUP]
Includes RECORD CONFIGURATION, SCHEDULE SETUP, and HOLIDAY.
4.[BACK-UP]
Provide users to backup recorded data to CD Drive.
5.[EXTERNAL DEVICE]
Includes TCP/IP SETUP, RS232C SETUP, PAN-TILT SETUP.
6.[FACTORY DEFAULT]
Reset the DVR to factory defaults.
7.[LANGUAGE]
Change the OSD language.
CHAP.4 Set Up
Caution:
1. It is strongly suggested to change the password after the initial setup. Please keep records of
your passwords. Rebooting the DVR and resetting the factory defaults will not reset the
password to the default.
2. Please contact your reseller if you forget the password.
3. The DVR will exit the Login screen and return to LIVE automatically if there is no action taken
for 4 seconds.
※Use ▲ or ▼ key to select the items and press ENTER to go into selection.
※Press MENU to go to the previous setup page or to exit SYSTEM SETUP.