Filter
Top Products
JPEG2000 Stand alone DVR User Guide
- 80 -
Introduction
PLAY ONLY MODE can be used in the following situations:
When you need to playback a hard drive from another DVR
When you need to playback the video which you deleted by running HDD CLEAR
Enter “PLAY ONLY MODE”
Turn on the DVR. At the initial screen that says HDD DETECT, press [PLAY] and System enters “PLAY ONLY
MODE”.
To exit PLAY ONLY MODE, reboot the DVR and DO NOT press PLAY at the initial screen.
Search
Use Search Bar to search the data by percentage.
You cannot use Time/Date and EVENT LIST to search the data.
Appendix.4 Play only mode
Under PLAY ONLY MODE:
1. DVR cannot record.
2. DVR cannot backup video to CD-R.
3. You still can connect to the DVR remotely. You can enter Playback remotely to search the data, but
there is no remote LIVE display.