Filter
Top Products
JPEG2000 Stand alone DVR User Guide
- 33 -
4-3-8 Password setup
The password consists of 1 to 8 digits. Press the number keys on the front panel to
enter the password and you can use any combination of the numbers from 1 to 10
.
1.[USER ID]
Press e or f to set User ID.
2.[USER PW]
Key in the current password.
3.[NEW PW]
Key in the new password.
4.[CONFIRM PW]
Enter the new password again for confirmation.
The three user levels have different authorities to operate the DVR.
Change Settings Clear HDD Change Password Playback & Search Remote Access
Admin
○ ○ ○ ○ ○
Manager
○ U
○※
○ U
User
○ U U ○ U
※It can change Manager ‘s and Users’ password.
4-3-9 System information
Indicate the system information and its status.
S/W version: Indicate the firmware version
H/W version: Indicate the PCB version
Product ID: Indicate the product ID number
MASTER: Indicate the information of MASTER HDD
SLAVE: Indicate the information of SLAVE HDD
CD-R: Indicate the information of CD-R
Default password:
ADMIN:
(
NULL
)
/ MANAGER: “1” / USER1: “2”
~
USER8: “9”
The product ID is not the DVR’s MAC address. MAC address can be found in
[EXTERNAL DEVICE] ＞ [TCP/IP setup].