Filter
Top Products
JPEG2000 Stand alone DVR User Guide
- 6 -
1-1 Front panel introduction
1.[CD-RW]
Built-in CD-RW for CD-R back-up.
2.[IR Receiver & LED Lamps]
IR Remote Controller Receiver.
DVR Status LED:
RUN- Flashes when play picture by picture through J. Shuttle.
ACTIVE- On when the J. Shuttle is ready to use.
REC- On while recording and flashes at stand-by mode, such as no motion triggered at the motion record mode
PLAY- On while playback.
FULL- On when HDD storage is full.
NET- On when the DVR is connected remotely.
3.[1~16 Channel Button]
Switch full screen of CH1~16
4.[MODE]
Switch among full and split screen displays.
5.[K.LOCK]
Lock the buttons on front panel.
6.[MENU]
Enter the menu and set up.
7.[Directions & ENTER]
Directions- Navigate the menu.
ENTER- Confirm the selected options.
8.[PTZ]
Press [PTZ] to enter the PTZ control mode. Press the PTZ buttons to control the PTZ camera directly.
9.[+ / -]
Adjust set-up value.
Adjust display orders of channel.
CHAP.1 Appearance