Filter
Top Products
JPEG2000 Stand alone DVR User Guide
- 35 -
4.[RESOLUTION]
By lowering the resolution, the DVR gains the recording speed but the
recorded pictures becom smaller.
Video system Full Mode Dual Mode Quad Mode
NTSC 60IPS@720*240 120IPS@360*240 240IPS@360*120
4CH
PAL 50IPS@720*288 100IPS@360*288 200IPS@360*144
NTSC 120IPS@720*240 240IPS@360*240 480IPS@360*120
8CH
PAL 100IPS@720*288 200IPS@360*288 400IPS@360*144
NTSC 120IPS@720*240 240IPS@360*240 480IPS@360*120
16CH
PAL 100IPS@720*288 200IPS@360*288 400IPS@360*144
※IPS is refered to field per second.
5.[RECORD IN ALARM]
Set the recording speed when an alarm is triggered.
6.[RECORD IN MOTION]
Set the recording speed when motion is detected.
7.[CONTINUOUS RECORD]
Set the recording speed under the continuous recording mode.
1. The recording speed is expressed in fractions. 1/ 1 is to record at the full recording
speed, which you set in RESOLUTION. 1 / 2 is to record at half of the recording
speed. 1 /3 is to record at one third of the recording speed. You can set up the
parameter from 1/1, 1/2, 1/3, 1/4,… to 1/999.
2. By lowering the recording speed, the DVR records less frames but gains a longer
recording duration. If you set the DVR’s recording speed at 1/2, the recording duration
will be two times longer. 1/3 will make the recording duration three times longer, and
so on.
3. When the RESOLUTION is set to QUAD Mode, the selection of the recording speed
is limited to 1/1, 1/2, and 1/3.
4. All active cameras share the recording speed. To turn off the recording on a specific
channel, please refer to [SYSTEM MENU]f[CONFIGURATION]f[CAMERA SETUP]
f[CAMERA ACTIVE SETUP]. Please note that channels with video loss are still
active and recording. In other words, those channels are still sharing the recording
s
p
eed.
1. Changing the RESOLUTION will NOT change the recording time on DVR.
2. To change the DVR’s recording duration, please adjust the DVR’s recording speed in the
following three settings.