Filter
Top Products
104
SI Enhance
Settings: Press the RIGHT Cursor key.
SI Enhance allows you to adjust your Side Imaging® View in three categories:
Sensitivity, Contrast, and Sharpness.
Whether you’re searching the Side Imaging® data for fish or certain bottom
contour, the most effective settings will vary with the situation. The display will
update as you adjust each category. SI Enhance can also be used during
Recording Playback (see Snapshot and Recording View).
• Sensitivity: Controls how much detail is shown on the display. When
operating in very clear water or greater depths, increased sensitivity shows
weaker returns that may be of interest. Decreasing the sensitivity
eliminates the clutter from the display that is sometimes present in murky
or muddy water. (1 to 20, where Low = 1, High = 20, Default = 10)
NOTE: The Sensitivity can be adjusted from the SI Enhance dialog box or the Side
Imaging® X-Press™ Menu. The Sensitivity setting is provided here so that you can easily
adjust the Side Imaging® data with the other settings. See Side Imaging® X-Press™
Menu: SI Sensitivity for more information.
• Contrast: Accents the light and dark parts of the Side Imaging® data to
provide greater definition. (1-20, Default = 10)
• Sharpness: Filters the view and sharpens the edges of the Side
Imaging® data. (Low (L), Medium (M), High (H), Default = Off)
• Contour Mode: Controls how the water column is displayed in the Side
Imaging® Views. In the normal display with the Contour Mode off, the
water column is displayesd on the view. The location of a target on the
display is based on the slant range to the target.
SI Enhance Submenu
Side Imaging® X-Press™ Menu