Filter
Top Products
85
SD Memory Card Slots
SD Memory Card Slots
The SD memory card slots on your control head
can be used with SD memory cards (optional-
purchase required) to add detailed charts to
your Fishing System, update software, or export
navigation data from your Fishing System.
To insert an MMC/SD card:
1. Remove the MMC/SD slot cover.
2. Position the MMC/SD card so that the label faces the right side of the
unit, and insert the card into the slot. Press down on the card until it
clicks into place.
3. Close the slot cover and turn the knob just 1/4 of a turn to close. Do
NOT over-tighten, as this will not improve water resistance and may
damage the cover.
To remove an MMC/SD card
:
1. Remove the MMC/SD slot cover.
2. Press the MMC/SD card into the slot and then release. The card will
eject from the slot.
Inserting an MMC/SD
into the Card Slot
NOTE: The SD Memory Cards require a separate purchase. For more information,
visit our Web site at humminbird.com or contact our Customer Resource Center
at 1-800-633-1468.