Jwin JD-VD503 DVD Player User Manual


 
PROGRAM:TRACK(01-20)
EXIT START NEXT
8. HOW TO USE PROGRAMMING FUNCTION
8.1 PROGRAMMED PLAY FOR SVCD,
VCD AND CD DISCS
8.2 PROGRAMMED PLAY FOR DVD DISC
Press the PROG button on the remote control and the
picture on the right will appear on the screen. The
first two digits are for title and the last two digits
are for chapter.
Press PROG to enter the interface as shown in picture
at right, then press number keys to input track number.
For example, if you want to play track
""
2, 6, 22, you can input as follows:
1 [02] ---------------- input 2
2 [06] ---------------- input 6
3 [22] ----------------press +10 button twice,""
and press 2 button once""
Move the highlighted bar to the START column, press
PLAY or ENTER to start a programmed play. If you
don't want a programmed play, you can enter the
programming menu, move the highlighted bar to the STOP
column, confirm and select EXIT , thus programmed""
play can be erased.
Notes:
1. If the number of inputted track is more than that
of the total tracks on the disc, the player will
automatically clear the inputted track number.
2. For DVD disc with only one title, the programming
method is the same as that of SVCD and VCD disc.
Users can input numbers according to the order of
Title-Chapter-Title-Chapter , other operations are
the same as 8.1.
Note: The inputted title number can't be more than
that of the total titles and the inputted chapter number
can't be more than that of the total chapters of the
selected title, otherwise the player will automatically
clear the inputted number.
PROGRAM:TT(12)/CH(--)
EXIT NEXT
32
R