Filter
Top Products
Sat Operation
32
*Example
Entering and transmitting a DiSEqC command
Assume you want to enter-in and send the
DiSEqC command E0 14 22:
Here, open the DiSEqC menu.
Press the button, „tx input“.
The cursor flashes in the lower left-hand
corner in the TX field.
Enter in the first digit of the hex number
with the softkey button „E.“
Enter in the digits, 0 14 22, with the nu-
merical buttons.
The figure shows, how the menu should
now look like.
Press ENTER to return to the DiSEqC
menu.
The given DiSEqC command is transmit-
ted by pressing the button, „tx.“
Simple DiSEqC
By repeatedly pressing the second softkey button, you access the Simple DiSEqC
menu. Also here, respective commands can be sent.
Simple DiSEqC offers two control possibilities: a continuous 22 kHz tone burst and
an uninterrupted 22 kHz data burst.
Selection of the
data burst
Selection of the
tone burst
Transmitting the
selected
bursts
data
burst
tone
burst
tx