Filter
Top Products
AV Menu
56
Breaking voltage
This function serves for supplying a breaking voltage on the Scart socket, in order
to control external units. By pressing this button, the breaking voltage can be
switched ON or OFF.
RGB operation
With this softkey, a RGB signal is available on the Scart socket or
a RGB signal can be fed-in at the Scart socket. Also observe the function of the
fast-blank-button.
The fast-blank-signal can be switched on or off. If this function is switched on, the
fast blank of the external unit can be fed-in and the external RGB signal becomes
visible on the screen of the MSK 33.
After exiting the AV menu, the last set AV operation type remains.
The video signal is displayed in the operation type RGB on an external moni-
tor (television set) with the displayed softkey fields.
MPEG transport stream interface (TS-Parallel, LVDS) (optional)
If the last softkey shows this representation, the input and output are locked.
According to this representation, the MPEG transport stream is on the interface TS-
Parallel (rear panel of the unit).
In this function, a MPEG transport stream can be fed-in on the interface TS-Parallel
(rear panel of the unit).
The MPEG decoder must be switched on in the TV or Sat digital menu (last softkey
– MPEG PICTURE) for the input and output of a MPEG transport stream. Here,
the current status is displayed in the second line of the on screen display.
Fb RGB
off
Fb RGB
on
LVDS
LVDS
LVDS