Filter
Top Products
TV Operation
43
TV Operation
TV menu
Calls up the main menu
Frequency entry of 44.75-867.2
MHz / DVB-T / BIII / UHF
The field lights up yellow as soon as the
softkey is pressed. Now, the frequency
can be entered-in with
numerical buttons,
„0...9,“ and „MHz“ or
changed with the cursor
buttons, ◄►, in 50 kHz increments. The
frequency is displayed in the lower left-
hand corner of the screen.
Mid-channel display
If a large „C“ or „S“ appears on the screen, the fre-
quency is set to mid-channel.
The entered frequency is not in mid-channel of the
respective RF standard, if a small „c“ or „s“ does not
appear.
Entering in a channel
This field lights up yellow, as soon as the softkey is pressed. The channel can be
entered with two digits with the numerical buttons, „0...9“ or changed with the cur-
sor buttons, ◄►.
A large „C“ appears in front of the channel display,
when a channel is optimally tuned.
Entering a special channel
By pressing the softkey once more, „chans“ appears in the menu field. A special
channel not now be entered-in.
For tuning to a special channel, a large „S“ appears
in front of the channel display.
Selecting analogue, DVB-C and DVB-T measurement
Calling up the menu TV control
In this menu, all remotely controlled parameters such as remote power feeding
voltage, 22 kHz, DiSEqC, tone burst (Simple DiSEqC) and V-SEC are set.
Receiving frequency is optimally set
Frequency is not optimally tuned
TV
CONTROL
analog
>
TV
MEASURE
70
C10 210.25MHz A65.0dBµV
< > rf
frq
BACK
< > rf
chan
>
analog
>
digit.
DVBC
>
digit.
DVBT
>