Filter
Top Products
Sat Operation
33
UFOmicro DiSEqC menu
General information
In the UFOmicro mode, one or various head stations EXU 544 in a Kathrein in-
house system can be tested. The test can be carried with or without a KATHREIN
satellite receiver from the 400 series or higher.
The following functions and features are available:
1. Simulates the basic function of a Kathrein satellite receiver.
Transmitting of „virgin call for address“, „call for address“, „program command“,
„poweron/off“ – in consideration of the allocated pages of the collision protec-
tion.
2. Simulation of max. 12 UFD receivers in conjunction with the installed UFOµ-
head stations. 12 pre-programmed factory settings can be called up.
3. Monitoring (watching and recording) of DiSEqC commands, which are
transmitted between the UFOmicro head stations and the UFD receivers for a
specific period of time.
4. Display of the respective receiver 01...12 with the head end reply, receiver ad-
dress, remote IF and the collision protections pages (t0, t1, t2 in ms).
Analogue picture assessment of the remote IF, which is allocated from the
head station or in conjunction with the spectrum representation in the spectrum
menu.
5. Antenna socket testing ( testing the disconnection function).
Display fields
RX field
In this field, the telegrams, which are received from the current
head station, are displayed.
In the case of activated monitoring, a maximum of five tele-
grams are recorded. The respective displayed telegram is
indicated with the no. RX: 0 ...... RX:4. Flashing signalises the beginning of the re-
cording. At the end of the recording, the last recorded telegram is displayed.
Status field
In the centre of the screen, the status of the head station and the registered re-
ceiver as well as the transmission error and the transmission status are displayed.
The following messages are possible:
!no acknowledge EXU544!
Transmission error EXU ...... MSK33
! acknowledge EXU544 !
No transmission error
!Rec. -- not registered!
Receiver is not yet registered in the head station
Rec. -- - registered -!
Receiver registered in the head station
!Rec. -- -- Stand-by --!
Receiver is registered but in standby
UFOu + Bus-Control
MSK 33 considers the collision protection, INT33
is equipped
UFOu without Bus-Control
MSK 33 does not consider the collision protec-
tion, INT33 is not equipped
FRAME ADD COM -DATA-
RX 0 E2 10 33 -----