Filter
Top Products
19
206-4263
EZ-Manager Wizard (Cont.)
The procedure below assumes that the desired le(s) is/are already loaded onto the USB device.
For further information on USB Download Menu functions and le requirements, and/or for
information on creating conguration les, refer to the appropriate section(s) in this document.
Before You Begin
• Ensure the USB device to be used has been formatted with FAT format.
• If you intend to use the Zoning feature(s) on this TV, make sure to assign the appropriate TV
Zone # and/or Wi-Fi Zone # in the EZ-Manager’s Zones, Label, and Room Number screen
BEFORE continuing with USB Conguration. See “TV Conguration Options” on page 14 for
further information.
• Refer to “Custom Master TV Setup” on pages 32 to 35 for information on creating a TLX or TLL
file for cloning purposes, and/or refer to “Creating an FTG Conguration File” on pages 42 to 43
for information on creating an FTG Conguration (.tlx) le for FTG Mode conguration.
• See Reference section, “Downloading a Splash Screen using a USB Memory Device,” for splash
screen image guidelines.
• See Reference section, “Upgrading TV/PTC Software using a USB Memory Device,” for further
information on software upgrades.
USB Conguration via EZ-Manager Wizard
With either the TV Conguration Options or the Zones, Label, and Room Number screen on display,
proceed as follows to congure the TV using the USB memory device.
1. Insert the USB memory device that contains the appropriate le(s) into either of the TV’s USB
ports.
2. Use the arrow keys on the Installer Remote to select USB Conguration, and then press OK.
You will be redirected to the TV’s USB Download Menu:
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Diagnostics
Teach To TV (TLL)
Teach To TV (TLX)
Previous OK
Note: You can press on the Installer Remote at any time to return to the EZ-Manager Wizard.
3. Select the appropriate option from the USB Download Menu, and complete the download as
required.
Note: If you perform a software upgrade from the USB Download Menu, the TV will complete
the upgrade and then reboot. Upon restart, the TV will display the EZ-Manager TV Configuration
Options screen. If desired, you can re-access the USB Download Menu (to perform additional
functions), proceed with conguration via the wizard, or exit the wizard.
4. Remove the USB memory device, and verify that the appropriate configuration is resident on
the TV.