LG Electronics 32LY750H CRT Television User Manual


  Open as PDF
of 84
 
44
206-4263
Teaching FTG Conguration to a TV
This section describes how to transfer (Teach) an FTG Conguration le from a USB memory
device to a TV using the USB Download Menu “Teach To TV (TLX)” option. The FTG Conguration
le may be created either in the FTG File Manager or from a Master TV Setup that was saved
(Learned) from a Master TV. Refer to “Creating an FTG Conguration File” on pages 42 to 43 for
information on creating an FTG Conguration le using the FTG File Manager.
Before You Begin
• Ensure the USB device has been formatted with FAT format.
• If the EZ-Manager Wizard appears on the screen when you turn ON the Target TV, you can use
the wizard’s “USB Conguration” option to access the USB Download Menu and complete the
Teaching process (see “TV Conguration Options” and/or “USB Conguration” on pages 14 and
18, respectively, as necessary).
• You may also use the LG Smart Install utility to complete the Teaching process. See “LG Smart
Install Utility” on pages 20 to 21 for further information.
• If the Target TV is currently in Pass-through Mode and you intend to use the TV’s Zoning
feature(s)—i.e., the FTG Conguration le you are Teaching contains an FTG Channel Map
and/or FTG prole(s) with TV Zone and/or Wi-Fi Zone assignments—make sure to assign the
appropriate TV Zone # and/or Wi-Fi Zone # in the TV when directed to do so in the procedure
below. See Reference section, “Using the TV’s Zoning Features,” for further information.
• If the FTG Conguration le contains an FTG Channel Map that was created in the FTG File
Manager, each logical channel number in the FTG Channel Map has been assigned a physical
RF channel or an Aux input (the latter designated by 130-0 through 137-0—see also Reference
section, “TV Aux Input Conguration”). If the FTG Conguration le contains an FTG Channel
Map that was Learned from a TV, the physical RF channels in the FTG Channel Map have been
assigned logical channel numbers (See “Learning FTG Conguration from a TV” on page 46 to 47.
• If the FTG Conguration le was created in the FTG File Manager, it may contain multiple zoned
FTG Installer Menu proles for different TV models. Make sure it includes the appropriate Installer
Menu prole(s) for the Target TV(s) before Teaching.
Caution: Do not unplug the TV power cord or remove/disconnect the USB memory
device while Teaching, as doing so may cause the TV to malfunction or harm the USB
device, respectively.
Teach FTG Conguration to Target TV
1. Turn ON the Target TV.
2. The next step depends on whether the EZ-Manager Wizard appears on the screen when you
turn ON the TV:
• If the wizard is displayed, you can complete the Teaching process via the wizard, as indicated
above (see “Before You Begin”). However, to continue with this procedure and access the
“Teach to TV (TLX)” option from the TV menus, exit the wizard. Then, continue with step 3.
• If the wizard is not displayed, go directly to step 3.
FTG Mode of Operation (Cont.)
(Continued on next page)
 previous next