Filter
Top Products
48
206-4263
FTG Mode of Operation (Cont.)
(Continued from previous page)
3. Use the Installer Remote to access the PTC Installer Menu (see “Accessing the Installer Menu”
on page 22 for further information).
4. Set Installer Menu item 003 BAND/AFC, as appropriate.
• Broadcast: Set to 0. • HRC: Set to 2.
• CATV: Set to 1 (default). • IRC: Set to 3.
5. Set any other Installer Menu items that affect your TV programming network to the required
conguration. For example, enable/disable Aux inputs, set a Start Channel, etc.
You may also congure any required settings in the IP Environment Menu (accessible from the
Installer Menu), for example wireless network connection settings, Pro:Centric IP settings, etc.
See “IP Environment Setup” on pages 53 to 60 for further information. However, note that you
cannot return directly to the Installer Menu from the IP Environment Menu; thus, you may wish to
set all Installer Menu items as needed before you access the IP Environment Menu. Otherwise,
you will need to reaccess the Installer Menu to set additional items.
6. After you have adjusted all Installer Menu item settings as required, press OK once on the
Installer Remote to save your changes; then, press OK again to exit the menu.
Set Up TV Features
On-screen setup menus control the features of the TV. Press MENU SETTINGS on the Installer
Remote to access the TV setup menus, and then set Channel, Picture, Audio, Time, etc. options to
the desired configurations. In particular, if you intend to use the TV’s Zoning feature(s), make sure
to assign the appropriate TV Zone # and/or Wi-Fi Zone # as described in Reference section, “Using
the TV’s Zoning Features.”
Run Auto Tuning (Channel Search)
Note: Decryption of Pro:Idiom encrypted channels will not be enabled unless you use the FTG
File Manager to set the channel attributes.
1. Search for all available analog and digital channels: Use the Installer Remote to go to the
Channel Menu, select the Auto Tuning option, and follow the on-screen instructions.
2. Use the Channel Edit option in the Channel Menu to edit the channel lineup, as necessary.
Add/delete channels per your system requirements.
Once you have completed these procedures, return to “Learning FTG Conguration from a TV”
above to complete the Learn sequence.