32
206-4263
Custom Master TV Setup
This section describes how to create a customized Master TV Setup for cloning purposes when the TV is
in Pass-through Mode.
Note: Cloning requirements and procedures are described in detail on pages 37 to 41. Refer to FTG Mode
information on pages 42 to 48 for details on entering FTG Mode and conguring/editing the FTG Channel
Map and FTG Installer Menu settings.
Before You Begin
• It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel Search).
Under certain conditions, Auto Tuning is disabled if there is an Aux input active.
• All Learning and Teaching processes on these TV models are performed via USB memory device. See
“Cloning Methods” below to determine the type of le—either the TLX le format or the legacy TLL le
format—to use for cloning purposes. Several of the Master TV Setup procedure steps are dependent on
the desired le type.
Cloning Methods
See also “Clonable TV Setup Menu Features” list below.
Using a USB Memory Device / TLX File
• The TLX le format clones Installer Menu settings, IP Environment Menu settings (with the exception
of network settings and the TV name), and all TV sources’ (analog, digital, AV1, HDMI, etc.) clonable
setup menu settings.
• Not intended for cloning an auto-tuned/edited channel lineup, as the channel lineup is converted to a
logical FTG Channel Map when saved (Learned) from a TV to a TLX le. If the TLX le with the FTG
Channel Map is then used for Teaching purposes, the Target TV(s) will be congured for FTG Mode.
Using a USB Memory Device / TLL File
The TLL le format only clones the contents of the commercial controller (PTC) memory, which is limited
to an auto-tuned/edited channel lineup, Installer Menu settings, and one TV source’s (analog, digital, or
Aux) clonable setup menu settings.
Clonable TV Setup Menu Features
Note: Some menu options vary between analog and digital channels and Aux inputs.
* Advanced Control & Picture Option (Picture Mode), User EQ (Sound Mode), AV Sync, DST (Clock Mode), and Pointer
settings are cloned via TLX file only.
Channel
Auto Tuning (Channel Lineup)
Manual Tuning
Channel Edit
Channel Label
Picture
Picture Mode *
Audio
Sound Mode *
Volume Mode
Virtual Surround
Clear Voice
AV Sync *
Sound Setting
Time
Clock Mode (Auto/Manual) *
Time Zone
Auto Off
Option
Language
Caption
Pointer *