Filter
Top Products
39
206-4263
Cloning Procedures (Cont.)
(Continued from previous page)
3. If the Master TV Setup contains a TV Zone # and/or a Wi-Fi Zone #
assignment, make sure to assign the same Zone designation(s) in the
Target TV at this time. See Reference section, “Using the TV’s Zoning
Features,” for further information.
Note: In order for the proper location-specic TV Zone and/or
Wi-Fi Zone prole data to be applied, the Zone designation(s)
must be assigned in the Target TV(s) BEFORE Teaching is
performed.
4. Insert the USB memory device with the TLX le into either of the Target
TV’s USB ports.
5. Press MENU SETTINGS on the Installer Remote to display the TV setup
menus. Use the arrow navigation keys to select/highlight the Option
menu icon, and then press the number “7” key a total of seven times to
display the USB Download Menu.
6. With the USB Download Menu on display, use the Up/Down arrow keys to
select Teach To TV (TLX), and then press OK.
7. In the Teach To TV (TLX) window, use the Up/Down arrow keys to select
the Master TV Setup you want to install.
Note: Filenames for TLX les Learned from a TV are comprised of the TV
model and a ve-digit number, for example, xxLY750H-UA00003.TLX.
8. Press OK when you are ready to initiate the Teaching process.
Teaching status will be shown on a progress bar in a new window. Do
NOT remove the USB device until Teaching is complete. When the
Teaching process is complete, the TV will briey display a “Teaching
Completed” window and then exit the USB Download Menu.
9. Remove the USB memory device from the Target TV, and verify that the
Master TV Setup is now resident on the Target TV.
After the Teaching process is complete, the TV tunes according to the setting
of Installer Menu item 004 STRT CHANNEL (Start Channel). If a Start Channel
is specied, the TV will tune to that channel; otherwise, the TV will return to the
last channel tuned.
Teach To TV
UPDATING...
Do not unplug!
50%
Teach To TV (TLX)
Previous OK
xxLY750H-UA00003.TLX
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Diagnostics
Teach To TV (TLL)
Teach To TV (TLX)
Previous OK
Note: The Diagnostics option in
this menu is for service use only.