Filter
Top Products
22
206-4227
View System Information
1. Log in to the PCS200R as described on the previous page.
2. At the
Command >
prompt, type info and press Enter.
The System Information display identies important information about the PCS200R, including
the unit serial number, hardware ID (rmware version), software versions, MAC addresses, and
IP addresses, for example:
PCS200R Pro:Centric Server v7.4
Copyright (c) 2010 - 2015 Zenith Electronics LLC
SN: 201-12301011
Hardware ID: 2
OS version: Linux 3.4.0-zenith-pcs200+
OS release: #121 SMP Mon Dec 8 10:38:49 CST 2014
Ctrl MAC: 00:0C:63:40:36:14
Ctrl IP: 10.1.2.3
Feat MAC: 00:0C:63:40:36:15
Feat IP: n/a
VPN IP: n/a
RF config: Mode 3, 256-QAM-B, RF: 6 MHz, 5.36 MSps, ASI: 38.81 Mbps
RF channel: 75
Channels: 1
Local time: Mon Jan 19 14:42:02 EST 2015
Note: If RF output is configured for DVB-C modulation, the display will identify the RF
frequency (in KHz) in place of the RF channel.
It is recommended that you record this information for future reference. If you nd it
necessary to call customer service or engineering support, please have this information
available.
Congure Network Settings
This option enables you to configure the network settings of the PCS200R Ethernet ports.
The Control Port is used for remote communication purposes, while the Feature Port is
designated for PCS200R IP output.
1. Log in to the PCS200R as described on the previous page.
2. At the
Command >
prompt, type setip and press Enter.
The system displays an overview of the current network conguration followed by the
Network Conguration Menu, for example:
PCS200R Conguration Options (Cont.)
(Continued on next page)