Filter
Top Products
30
206-4227
PCS200R Conguration Options (Cont.)
Format the Solid State Drive File System
This command formats the le system of the solid state drive installed in the PCS200R SSD
slot and is essential for video playout operation (see Reference section, “Using an SSD Storage
Device with the PCS200R,” for further information).
Note: If the drive was previously formatted for use with a different PCS200R server, you do
not need to reformat the le system.
Caution: Any les that are currently loaded on the solid state drive will be deleted
during formatting; it is not possible to recover les once the formatting is initiated.
1. Log in to the PCS200R as described on page 21.
2. At the
Command >
prompt, type format and press Enter.
The system will prompt for conrmation:
Are you sure you want to continue? [y/n]:
3. Either type y and press Enter to continue, or type n and press Enter to return to the Main
Menu without formatting the drive.
If you elect to continue, the system will then prompt you to re-enter the admin user
password before initiating the formatting process.
Please re-enter the admin password to format the drive.
Password:
4. Type the admin password and press Enter.
Formatting progress is displayed on the screen. When formatting is complete, the system
redisplays the
Command >
prompt.
Update the PCS200R Operating System via Ethernet
Caution: Do NOT initiate simultaneous menu sessions while a software update
is in progress. Doing so may interfere with the active process and may corrupt
the system configuration and/or cause the PCS200R to cease normal operation.
This option enables you to update the PCS200R operating system via the Ethernet. The
appropriate update file must be provided by LG; the system will not download an improper file.
Note: See “Update the PCS200R Operating System via Serial Link” on the following page for
information on updating software via a serial link.
1. Log in to the PCS200R as described on page 21.
2. At the
Command >
prompt, type update and press Enter.
3. At the
Enter update filename:
prompt, type in the software update lename and
press Enter.
(Continued on next page)