Filter
Top Products
26
206-4227
PCS200R Conguration Options (Cont.)
(Continued from previous page)
4. The system will display the following prompt for a location, followed by a list of options:
Please identify a location so that time zone rules can be set correctly.
Please select a continent or ocean.
At the
#?
prompt, type the number that corresponds to the appropriate option for your
location, and then press Enter.
5. The system will display the following prompt for a country, followed by a list of options:
Please select a country.
At the
#?
prompt, type the number that corresponds to the appropriate option for your
country, and then press Enter.
6. The system will display the following prompt for a region, followed by a list of options:
Please select one of the following time zone regions.
At the
#?
prompt, type the number that corresponds to the appropriate option for your
region, and then press Enter.
After you specify the time zone region, the system displays an overview of your location
selections and prompts for conrmation, for example:
The following information has been given:
United States
Central Time
Therefore TZ=’America/Chicago’ will be used.
Local time is now: Mon Jan 19 16:23:10 CDT 2015.
Universal Time is now: Mon Jan 19 22:23:10 UTC 2015.
Is the above information OK?
1) Yes
2) No
#?
7. Either:
• Type 1 and press Enter if the information in the display is correct. The system will conrm
the setting and then prompt you to reset the PCS200R:
Time zone has been set. Please reset the board.
Continue with step 8.
• Type 2 and press Enter to return to the initial location prompt and reset the time zone
(repeat this procedure from step 4).
8. If you are ready to reset the system immediately, at the
Command >
prompt, type reset
and press Enter (see “Reset the System” on page 32 for further information).
Note: If you intend to modify additional conguration settings during the current session,
you may wait until all changes are complete before you reset the system.